Your bag comes with two hardware protectors so you have an extra just in case.

1. Separate the film layers

Each protector has two parts:

• a shiny translucent layer (this is the actual hardware cover with adhesive)

• a matte opaque backing

Slowly peel the shiny layer away from the matte layer. This shiny layer is what will stick to your hardware.

2. Handle with care

Do this slowly and meticulously to avoid ripping the film.

Try not to touch the adhesive with your fingers — any oils or dust can affect how it sticks.

Use tweezers if needed for a cleaner application.

3. Align the cover

Place the film adhesive-side down.

Start by gently positioning it at the center of the hardware, right where the “H” begins.

Lay it lightly at first so you can adjust.

**If it’s not perfectly aligned, lift it off and reposition. It will not damage your hardware.

(And remember — you have a second protector if you need it.)

4. Press and attach

Once it’s lined up, start pressing it down:

• trace your finger over the center

• then smooth it toward each corner

• slide your finger along the edges and sides so the film fully adheres

5. Remove air bubbles

Rub your fingers across the entire surface to push out any bubbles.

**If tiny bubbles remain, don’t worry — they will naturally disappear within 12 hours as the film settles.It all begins with an idea. Maybe you want to launch a business. Maybe you want to turn a hobby into something more. Or maybe you have a creative project to share with the world. Whatever it is, the way you tell your story online can make all the difference.